The JIELI ACL01 Motorized Curtain Wall Switch provides wired UP and DOWN control for compatible electric curtain, blind and roller-shutter motors. Its clearly marked directional buttons and coordinated A Series full-board panel make it suitable for residential, hotel, office and commercial building projects. The voltage, current rating and operating mechanism can be configured according to the motor and target market.
Model: ACL01-Curtain Wall Switch
Motorized curtains and blinds require separate directional control for opening and closing. A standard lighting switch is not designed to manage these two motor directions correctly. The JIELI ACL01 Motorized Curtain Wall Switch provides dedicated UP and DOWN control within a coordinated A Series wall panel.
The switch is intended for compatible reversible curtain, blind and roller-shutter motors. The final electrical rating, terminal arrangement and operating mechanism must be matched to the selected motor before installation.
| Item | Reference Specification |
|---|---|
| Model | ACL01 |
| Product Type | Motorized Curtain Wall Switch |
| Control Function | UP and DOWN Direction Control |
| Reference Rated Current | Approximately 5–10A |
| Reference Rated Voltage | Up to 250V AC |
| Typical Supply Systems | 110–120V AC or 220–240V AC |
| Frequency | 50/60Hz |
| Compatible Load | Reversible Curtain, Blind or Roller-Shutter Motor |
| Operating Mechanism | Momentary or Maintained Action, subject to confirmation |
| Directional Interlock | Confirm according to selected mechanism |
| Panel Material | PC; other finishes subject to confirmation |
| Base Material | High-Strength PC |
| Contact Material | Copper or Copper/Silver-Alloy Contact System |
| Terminal Type | Screw Terminal or Project-Specific Terminal |
| Installation | Flush Wall Mounting |
| Customization | Color, Logo, Label, Packaging and Electrical Version |
| Compliance | Confirm according to destination market |
The rated current shown above is a reference contact-rating range. The permitted motor load may be lower because curtain motors are inductive loads. Motor voltage, operating current, starting current and wiring requirements must be confirmed before ordering.
The ACL01 uses separate directional controls for opening and closing a compatible motorized curtain or blind.
Pressing the UP control sends power to the motor’s opening-direction terminal. Pressing the DOWN control sends power to the closing-direction terminal. Depending on the selected mechanism, the switch may use momentary action or maintained action.
The two directions should not be energized at the same time. The final product mechanism and wiring design must provide suitable directional control for the selected motor.
The ACL01 Motorized Curtain Wall Switch can be considered for:
Before selecting the switch, buyers should confirm:
The ACL01 should not automatically be described as compatible with every curtain motor. Low-voltage DC motors, smart curtain systems and bus-controlled motors may require a separate controller or relay interface.
The curtain wall switch can be installed together with matching A Series light switches, dimmers, power sockets, multimedia sockets and indicator panels. This helps residential and commercial projects maintain a consistent panel shape, color and surface finish.
JIELI supports different voltage and current versions, panel colors, operating mechanisms, branding, product labels and customized packaging. Buyers should provide the motor specification, wiring diagram, order quantity and target market before sample confirmation.
A curtain switch controls two motor directions: opening and closing. A normal light switch usually controls only the ON and OFF state of one circuit and may not prevent conflicting motor-direction commands.
Both operating styles are common in curtain-control applications. The final ACL01 mechanism must be confirmed before ordering. Momentary versions operate while the button is pressed, while maintained versions remain in the selected position until released or changed.
It may be connected directly when the motor voltage, current, starting current, wiring and control method match the switch rating. A relay or dedicated controller may be required for higher loads, multiple motors or electronic control systems.
Directly connecting multiple motors to one switch is not recommended without checking the motor manufacturer’s instructions. Multiple motors may require isolation relays or a dedicated group controller.
The product shown is treated as a conventional wired curtain switch. Wi-Fi, RF, Zigbee or smart-home functions should not be assumed unless a separate smart-control version is confirmed.
Samples may be requested to verify the operating mechanism, directional interlock, terminal arrangement, panel finish and motor compatibility. Sample availability and preparation time should be confirmed with the sales team.
Contact JIELI with the motor voltage, running current, starting current, wiring diagram, control method, order quantity and destination market. Our team can assist with configuration confirmation, samples, OEM/ODM options and project quotations.
Leave your details below and our team will get back to you soon.
